Enertex LED lamps have transformed ordinary LED lighting so that it is now safe and healthy for us.
Our lamps have been specifically designed to block 100% of harmful wavelengths of light that interfere with the melatonin being released.
We’ve also incorporated an advanced controller to eliminate light flicker entirely.
Normal LED lamps produce flickering causing headaches, migraines, and eye strain.
Our lamps are also low EMF (electromagnetic fields) to reduce exposure to harmful radiation.

Our amber light Amber lamps guarantee a blocking of all blue light wavelengths up to 500 nm, and our red light Ruby lamps all blue and green light wavelengths up to 570 nm.

Several major lighting manufacturers have introduced lamps that have lower blue light output, referred to as “warm white.”
However, these lamps have not been designed with sufficient elimination of the blue light spectrum, and they still emit high amounts of blue light and flicker.

So far, only Enertex lamps are guaranteed to be 100% free of blue light, 100% flicker-free, and with low EMF emissions.

Conventional LED lamps are bad for us, yes, but all Enertex lighting products are not the same as conventional LED lighting.

The common LED lighting found in most homes is bad for our health for two main reasons.
They have a very high peak in the blue light range and very low in the yellow, orange, and red colors.
This high intensity of blue light is a far cry from the natural balanced light found in nature, it can cause eye damage, eye strain, headaches, and migraines.
It also causes sleep disturbances by suppressing the sleep hormone melatonin.

Second, conventional LEDs produce flickers that, although not visible to the human eye, turn on and off hundreds of times per second.
The brain can recognize these flickers even though you can’t, which can lead to eye strain, headaches, loss of concentration, and even eye damage.

All Enertex lighting products have been extensively researched, designed, and manufactured to eliminate these harmful aspects of LED lighting.
All of our lamps contain zero blue light wavelengths and it is the only LED available that does not include the blue color spectrum at all.
All of our lighting products are low EMF and eliminate flicker, providing a soft, consistent light that’s better for your health.

Be very careful with cheap colored lamps, even if they look like natural orange or red light, they are not.
We have measured them with a laboratory spectrometer and found that they emit significant levels of blue light.
Even a small amount of blue light can disrupt your circadian rhythms.
These lamps have not been tested or specifically designed to remove 100% of the harmful blue and green light spectrum.

Cheaper lamps will also have flickering which has been shown to cause migraines, damage the eyes, and can even affect our nervous system in the long run.

All Enertex lighting products only emit a certain beneficial wavelength of light, produce zero flicker, and are low EMF.
All of our lighting products are spectrum tested and are 100% free of blue light (and green light for Ruby lamps).
We also provide the exact light spectrum reports of each lamp to show you the exact wavelengths being emitted.

We have developed the Amber lamp to be a general purpose lamp that can be used throughout the house to replace most lamps over 60 watts, as it provides enough brightness and color while eliminating 100% of harmful blue light.
This is a good alternative to changing most of the lamps in your house, which emit a nice and relaxing warm amber light.

The Ruby lamp is a slightly dimmer light that not only eliminates all blue light, but also all green light.
They are ideal for use in reading lamps, bedrooms and bathrooms, or anywhere you relax at night in the last hours before bed, as they still provide plenty of light for reading and viewing and emit a glow between dark orange and red.
They are the ultimate in lamps to ensure the best possible sleep.

Ideally, you should have a combination of Amber lamps and Ruby lamps at home.
Amber lamps are ideal for use in lighting throughout the house, and in areas of the house where brighter light is favorable.
Ruby lamps are ideal to use in the last hours before bed when you are relaxing for the evening, such as reading lamps, bedrooms, children’s rooms, etc.

Yes, of course.
We have designed these lamps to be for general use in all areas of the house.
They provide enough light for living rooms and bedrooms, but also emit a soft, warm and relaxing light, making them suitable for reading lamps and children’s rooms.

Since eliminating blue light at night is so important, you should use the lamps in any room where you or your family regularly spend the afternoon and evening hours.

Ideally, you should turn off the lights and keep the room as dark as possible during sleep.
However, if you don’t feel comfortable sleeping with the lights off, we recommend using our red night lights, which have been designed to provide very low wattage and just enough dim light to remove darkness from the room, and which can be safely kept on while you sleep.

Our lamps are not suitable for use with dimmers or dimming.
This is by design, because when LED lamps are dimmed and not operating at full brightness it significantly increases the amount of light flicker, but also creates high levels of EMF emitted by the lamps.
We have designed our lamps to be flicker-free and low EMF, which is why we have decided not to dim them.